Audi A4, S4
Introduction
- Controls and receptions of safe operation
   Controls and devices
   Information system of the driver (FIS)
   Unlocking and car lock-out
   Illumination and review maintenance
   Seats and niches
   Heater, ventilation and air conditioner
   Automatic transmission (АТ)
   Communication and navigation
   Universal remote radio management HOME LINK
   Safety systems
   Features of operation and auxiliary systems
   Обкатка
   Trailer towage
   In case of emergency
   Car refuelling
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
Body
Onboard electric equipment





Automatic transmission (АТ)

5-step Tiptronic

Introduction

The car is completed with 5-step automatic transmission with electronic control. Switching on the raised and lowered steps is carried out automatically.

For the reasons of the expense of fuel and preservation of the environment on some updatings transmission is arranged so that the maximum speed of the car is reached only in position S.

The transmission is completed also with system tiptronic. The given system gives to the driver, at desire, possibility of manual switching.

Maintenance instructions of automatic transmission

Switching on the raised and lowered steps of a forward course is carried out automatically.

Fragment of the central console: the lever of the selector with the blocking button

Трогание from a place

 PERFORMANCE ORDER

    Press and keep a brake pedal. Keeping pressed the blocking button (on the selector lever), establish the selector lever in the necessary position, for example, position D, and release the blocking button. Wait, while automatics will execute inclusion, having created power communication of a transmission with driving wheels (at the moment of inclusion we will feel a little push). Release a pedal of a brake and press an accelerator pedal.

Short-term stops

 PERFORMANCE ORDER

    Keep the car a brake pedal, for example, at traffic lights. Thus do not press an accelerator pedal.

Parking

 PERFORMANCE ORDER

    Press and keep a brake pedal. Completely tighten a manual brake. Keeping pressed the blocking button, establish the selector lever in position P and release the blocking button.

The engine can be got only at a finding of the lever of the selector in position Р or N, Features of operation and auxiliary systems see.

At parking out of the blue it is enough to establish the selector lever in position Р. At a road slope tighten at first against the stop a manual brake and only then translate the selector lever in position Р. Thanks to it loading decreases for the mechanism of blocking and is facilitated страгивание the lever of the selector from position Р.

Positions of the lever of the selector

In the given section the description of all positions of the lever of the selector is resulted.

The display: positions of the lever of the selector

The allocated indication of actual position of the lever of the selector is deduced on the control panel display.

Р - lay blocking

In the given position driving wheels are blocked mechanically. This position should be included only on the motionless car.

For installation of the lever of the selector in position Р and its conclusion from the given position press the blocking button (on the selector lever) and, simultaneously, a brake pedal.

R - backing transfer

At installation of the lever of the selector the given position joins backing transfer.

Backing transfer include only at the motionless car and at engine work idling.

For installation of the lever of the selector in position "To" press the button of blocking and simultaneously a brake pedal. At the included ignition and a finding of the lever of the selector in position R backing headlights burn.

N - neutral position (idling position)

The given position is idling position.

D - a substantive provision at advance

In the given position switching on the raised and lowered steps of a forward course is carried out automatically, depending on loading of the engine, speed and the dynamic program of switching (DPS).

For transfer of the lever of the selector from position R in position D at speed less than 5 km/h or the motionless car are necessary press a brake pedal.

Under certain circumstances, (for example, at movement in mountains or to the trailer) happens more preferably temporarily to be switched to the manual program of switching see more low.

S - sports position

Establish the selector lever in position S at movement in a sports mode. More later switching on the raised steps allows to use reserves of capacity of the engine completely.

For transfer of the lever of the selector from position N in position S at speed less than 5 km/h or the motionless car press a brake pedal

At inadvertent transfer during movement of the lever of the selector in position N before to return to a mode D or S, dump gas and wait falling of turns to an idling mode.

For the reasons of the expense of fuel and preservation of the environment on some updatings transmission is arranged so that the maximum speed of the car is reached only in position S

Blocking of the lever of the selector

Blocking of the lever of the selector prevents involuntary inclusion of a range of movement and by that spontaneous movement of the car from a place.

Blocking cancellation is carried out as follows:

    Include ignition. Press a pedal of a brake and keep simultaneously pressed the blocking button.

Automatic blocking of the lever of the selector

At the included ignition the selector lever is blocked in position P and N. For страгивания it from these positions press a brake pedal. As a reminder to the driver at a finding of the lever of the selector in positions Р and N on the display there is a following indication:

Beim Einlegen einer Fahrstufe im Stand Fussbremse betatigen (at a choice of a mode of movement of the motionless car press a brake pedal).

Besides, on a side scene of the lever of the selector the symbol of automatic blocking of the lever of the selector lights up.

The selector lever is blocked only on the motionless car, and also at speed to 5 km/h. At speed approximately from 5 km/h and above there is an automatic cancellation of blocking of the lever of the selector which is in position N.

At fast (without pauses) transfer of the lever of the selector through position N (for example, from position R in position D) the selector lever is not blocked. It gives, for example, movement possibility враскачку the got stuck car. If the selector lever at the released pedal of a brake is more than 1 second in position N it is blocked.

The blocking button

The button of blocking of the lever of the selector interferes with involuntary transfer of the lever of the selector in some positions. By pressing of the given button the selector lever is deblocked.

Key blocking in the ignition lock

After deenergizing of ignition the key can be taken from the lock only at a finding of the lever of the selector in position Р (lay blocking).

After extraction of a key from the lock the lever is blocked in position Р.

Device Kick-down

Device Kick-down allows to realise the maximum acceleration.

By sharp pressing of a pedal of an accelerator with transition of a point of resistance automatics is switched, depending on turns and speed, on a hill-climbing gear. Switching on the following raised transfer occurs right after achievements of the maximum turns of the engine corresponding to given transfer.

The dynamic program of switching (DPS)

Management of automatic transmission is carried out by electronics.

Management of automatic transmission is carried out by electronics. Switching on raised and hill-climbing gears is carried out according to programs of movement stored in memory.

At a reserved manner of driving automatics chooses the economic program of switching.

At a temperamental manner of driving with sharp dispersals and frequent differences of speed, with use of the maximum speed or after sharp pressing an accelerator pedal (Kick-down) automatics works in a range of sports programs. Late transition to the raised transfers allows to realise a stock of capacity of the engine completely. Switching on hill-climbing gears is carried out at higher turns of the engine.

The choice optimum on concrete conditions of the program of movement represents continuous process. However irrespective of it it is possible to be switched to more sports program, sharply having pressed an accelerator pedal. Thus the transmission is switched to the lowered step corresponding to actual speed of movement, providing possibility of dynamical dispersal (for example, at overtaking) without necessity of sharp pressing against the stop accelerator pedals. After return switching on the raised step and at a corresponding mode of driving work under the primary program is restored.

The movement program in mountains operates a choice of transfers on liftings and descents. Thanks to it it is not required to be switched at movement to lifting. Pressing of a pedal of a brake at movement under a bias carries out switching on the lowered step. Thereof it is possible to brake the engine, without resorting to manual switching.

Mode tiptronic

System Tiptronic gives the chance to the driver also a manual gear change.

The central console: position of manual switching (tiptronic)

The display: indication of manual switching

Switching on a manual mode

Wring out the lever of the selector from position D to the right. At the included manual mode on the display there is an indication 5 4 3 2 1 with allocation of the transfer included at the moment.

Switching on the raised transfers

    While translating the selector lever forward (in position Tiptronic) there is a switching on the raised transfers.

Switching on hill-climbing gears

    While translating the selector lever back (in position Tiptronic) there is a switching on hill-climbing gears (-).

To be switched to a manual mode it is possible both during movement, and during parking.

At dispersal at 1, 2, 3 and 4 steps the box will automatically be switched to the following raised step shortly achievements of the maximum turns of the engine.

At switching from the raised transfer on lowered automatic switching is possible only when there is impossible an excess of the turns of the engine defined for given conditions.

At work of device Kick-down transmission is switched to the watching lowered step depending on speed and engine turns

The emergency program

In case of malfunction of system automatics is switched to the emergency program.

At malfunction of system automatics is switched to the emergency program. About it fire or extinction all segments of the display panel signals at once.

Thus it is possible to translate the selector lever in all positions. However in positions D and S 4th step will join.

Probably also inclusion of transfer of a backing R. However electronic blocking of transfer of a backing at work in emergency operation is disconnected.

In emergency operation the manual program of switching (Tiptronic) is disconnected.

At transmission switching in emergency operation address on HUNDRED diagnostics for carrying out and malfunction elimination.

Steering wheel Tiptronic

The keys located on a steering wheel give the chance to the driver also a manual gear change.

Steering wheel: keys (Tiptronic)

Switching on the raised transfers

 PERFORMANCE ORDER

    Press the top party of one of keys ()

Switching on hill-climbing gears

 PERFORMANCE ORDER

    Press the bottom party of one of keys (-)

Keys of switching of steps are in operating conditions when the selector lever is established in position D, S or in position of the manual program of switching (Tiptronic). At the included manual program of switching of a key on a steering wheel are shined.

Certainly, manual switching of steps by the selector lever on the central console is thus possible also.

Klinotsepnoj variator Multitronic

Introduction

Models it is completed бесступенчатой with transmission with electronic control (клиноцепной variator Multitronic). Unlike usual automatic transmission the transfer number changes not a step gear change, and is continuous. It promotes along with another to optimisation of comfort of traction effort and provides the optimum expense of fuel.

The choice of the corresponding transfer relation of transmission (switching on the raised and lowered ranges of movement) is carried out completely automatically, according to programs of movement stored in memory, see more low, the Dynamic program of regulation (DRP).

The transmission is completed also with system Tiptronic. The given system gives to the driver, at desire, possibility of manual switching of ranges, see more low.

Maintenance instructions

On the car with transmission Multitronic communication of the engine with driving wheels, unlike usual automatic transmission, is carried out through multidisk coupling, instead of through the twisting moment converter. As a result the car is a bit less subject to spontaneous movement at short-term stops with idling the engine and established in position D, S or R the selector lever. It is necessary to remember it first of all on biases/liftings if you went earlier by the car with usual automatic transmission with the converter of a twisting moment and are yet familiar with the given feature of a variator Maintenance instructions of the car with Multitronic see

Fragment of the central console: the lever of the selector with the blocking button

Трогание from a place

 PERFORMANCE ORDER

    Press and keep a brake pedal. Keeping pressed the blocking button (on the selector lever), establish the selector lever in position D and release the blocking button. Wait, while automatics will execute inclusion, having created power communication of a transmission with driving wheels (at the moment of inclusion we will feel a little push). Release a pedal of a brake and press an accelerator pedal.

Short-term stops

 PERFORMANCE ORDER

    Stop the car a brake pedal. Press and keep a brake pedal (for example, at traffic lights) so that idling to exclude spontaneous movement of the car forward or back. Thus do not press an accelerator pedal. For трогания from a place on liftings to avoid spontaneous movement of the car, tighten a manual brake.

Parking

 PERFORMANCE ORDER

    Press and keep a brake pedal. Completely tighten a manual brake. Keeping pressed the blocking button, establish the selector lever in position P and release the blocking button.

The engine can be got only at a finding of the lever of the selector in position Р or N, Features of operation and auxiliary systems see.

At parking out of the blue it is enough to establish the selector lever in position Р. At a considerable slope of road at first completely tighten a manual brake and only then translate the selector lever in position Р. Thanks to it loading decreases for the mechanism of blocking and the conclusion of the lever of the selector from position Р is facilitated.

Positions of the lever of the selector

The display: positions of the lever of the selector

The allocated indication of actual position of the lever of the selector is deduced on the control panel display.

Р - lay blocking

In the given position driving wheels are blocked mechanically. This position include only on the motionless car.

For installation of the lever of the selector in position Р and it страгивания from the given position press the blocking button (on the selector lever) and simultaneously a brake pedal.

To - backing transfer

At inclusion of transfer of a backing transmission automatically chooses the lowest transfer relation.

Backing transfer include only at the motionless car and at engine work idling.

For installation of the lever of the selector in position R press the button of blocking and simultaneously a brake pedal. At the included ignition and a finding of the lever of the selector in position R backing headlights burn.

N - neutral position (idling position)

The given position is idling position.

D - a substantive provision at advance

In the given position transmission chooses automatically optimum transfer relation. The transfer relation depends on loading of the engine, speed and the dynamic program of regulation (DRP).

For transfer of the lever of the selector from position N in position D at speed less than 5 km/h or the motionless car are necessary press a brake pedal.

For possibility / corpulent reduction in conformity of transfer number to traffic conditions, under certain circumstances, (for example, at movement in mountains or to the trailer) happens more preferably temporarily to be switched to mode Tiptronic, see more low.

S - sports position

Establish the selector lever in position S at movement in a sports mode. The given mode allows to use reserves of capacity of the engine completely.

For transfer of the lever of the selector from position N in position S at speed less than 5 km/h or the motionless car press a brake pedal.

At inadvertent transfer during movement of the lever of the selector in position N before to return to a mode D or S, dump gas and wait falling of turns to an idling mode.

For the reasons of the expense of fuel and preservation of the environment on some updatings transmission is arranged so that the maximum speed of the car is reached only in position S.

Blocking of the lever of the selector

Blocking of the lever of the selector prevents involuntary inclusion of a range of movement and by that spontaneous movement of the car from a place.

The central console: position of manual switching (tiptronic)

Blocking cancellation is carried out as follows:

 PERFORMANCE ORDER

    Include ignition. Press a pedal of a brake and keep simultaneously pressed the blocking button.

Automatic blocking of the lever of the selector

At the included ignition the selector lever is blocked in position Р and N. For страгивания it from these positions press a brake pedal. As a reminder to the driver, at a finding of the lever of the selector in positions Р and N on the control panel display there is a following indication:

Beim Einlegen einer Fahrstufe im Stand Fussbremse betatigen (at a choice of a mode of movement of the motionless car press a brake pedal).

Besides, on a side scene of the lever of the selector the symbol of automatic blocking of the lever of the selector lights up.

The selector lever is blocked only on the motionless car, and also at speed to 5 km/h. At speed approximately from 5 km/h and above there is an automatic cancellation of blocking of the lever of the selector which is in position N.

At fast (without pauses) transfer of the lever of the selector through position N (for example, from position R in position D) the selector lever is not blocked. It gives, for example, movement possibility враскачку the got stuck car. If the selector lever at the released pedal of a brake is more than 1 second in position N it is blocked.

The blocking button

The button of blocking of the lever of the selector interferes with involuntary transfer of the lever of the selector in some positions. By pressing of the given button the selector lever is deblocked.

Key blocking in the ignition lock

After deenergizing of ignition the key can be taken from the lock only at a finding of the lever of the selector in position Р (lay blocking). After extraction of a key from the lock the lever is blocked in position Р.

Device Kick-down

Device Kick-down allows to realise the maximum acceleration.

By sharp pressing of a pedal of an accelerator with transition of a point of resistance automatics is switched, depending on turns and speed, on the lowered range. Switching on the following raised range occurs at once on achievement of the maximum turns of the engine corresponding to the given range.

The dynamic program of regulation (DRP)

Management of transmission Multitronic is carried out by electronics.

Management of transmission is carried out by electronics. Switching on the raised and lowered ranges is carried out according to programs of movement stored in memory.

At a reserved manner of driving automatics chooses the economic program of switching.

At a temperamental manner of driving with sharp dispersals and frequent differences of speed, with use of the maximum speed or after sharp pressing an accelerator pedal (Kick-down) transmission is switched to more sports program range.

The choice optimum on concrete conditions of the program of movement represents continuous process. However, irrespective of it, it is possible to be switched to more sports program, sharply having pressed an accelerator pedal. Lower transfer relation of a transmission corresponding to actual speed of movement thus joins, providing possibility of dynamical dispersal (for example, at overtaking) without necessity of sharp pressing against the stop accelerator pedals. At the subsequent switching on the raised range and a corresponding mode of driving work under the primary program is restored.

At movement on mountain roads the transfer relation is continuously brought into accord with the lifting characteristic. At movement under a bias transmission is automatically switched by pressing of a pedal of a brake to the lowered range. Thereof efficiency of braking by the engine raises.

If at movement on mountain roads it is included темпостат * transmission automatically chooses lower transfer relation for keeping of the set speed. It conducts, however, to increase in turns of the engine.

Mode tiptronic

The manual program of switching (Tiptronic) gives the chance to the driver of manual inclusion of six programmed transfer relations (movement ranges).

The display: indication of manual switching (tiptronic)

Switching on a manual mode

 PERFORMANCE ORDER

    Wring out the lever of the selector from position D to the right. At the included manual mode on the display there is an indication 6 5 4 3 2 1 with allocation of the range of movement included at the moment.

Switching on the raised ranges

While translating the selector lever forward (in position tiptronic) there is a switching on the raised ranges ().

Switching on the lowered ranges

While translating the selector lever back (in position Tiptronic) there is a switching on the lowered ranges (-).

The manual program of switching gives the chance manual inclusion of six programmed transfer relations (movement ranges). To be switched to a manual mode it is possible both during parking, and during movement from position D.

At dispersal in ranges 1, 2, 3, 4 and 5 transmission will automatically be switched to the following raised range shortly before achievement of the maximum turns of the engine.

At switching from the raised range on lowered, automatics will be switched only after becomes impossible разносное increase in turns of the engine.

At falling of speed of movement (for example, at braking) and the minimum frequency of rotation of a shaft of the engine transmission will automatically be switched to the following lowered range.

Switching on the lowered ranges at movement under a bias raises efficiency of braking by the engine.

At work of device Kick-down transmission is switched to the following lowered range depending on speed and engine turns.

The emergency program

In case of malfunction of system automatics is switched to the emergency program.

At malfunction of system automatics is switched to the emergency program. About it fire all segments on the display panel signals at once.

Return indication

At a negative luminescence of indication it is possible to continue movement. However it is necessary to address on HUNDRED systems Multitronicj for check.

Blinking indication

Blinking indication testifies to serious malfunction of system. In this case cautiously move on HUNDRED malfunctions for elimination.

Steering wheel tiptronic

Transfer relations (movement ranges) can be switched steering wheel keys.

Steering wheel: keys

Switching on the raised ranges

 PERFORMANCE ORDER

    Press the top party of one of keys.

Switching on the lowered ranges

 PERFORMANCE ORDER

    Press the bottom party of one of keys.

Keys of switching of ranges on a steering wheel are in operating conditions when the selector lever is established in position D, S or in position of the manual program of switching (Tiptronic). Certainly, manual switching of ranges by the selector lever on the central console is thus possible also.