Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
- Suspension bracket and steering
   Security measures at work
    Suspension bracket of forward wheels
    Suspension bracket of back wheels
    Corners of installation of wheels of the car
   - Steering and safety pillows
      The general data and security measures
      Removal and installation of the block of a pillow of safety
      Removal and steering wheel installation
      Removal and installation of a tip of steering draught
      Removal and installation of a protective cover of the steering mechanism
Body
Onboard electric equipment



Луфар

Removal and installation of the block of a pillow of safety

Driver's pillow of safety

1 — Screws Torx T30, 7Нм
2 — the Steering wheel, various executions
3 — the spring Tip
4 — the Tip of the block of a pillow of safety
5 — the Block of a pillow of safety

6 — the Tip of a sound signal
7 — the Screw with an internal polyhedron, 50Нм
8 — the Tip of heating of a steering wheel
9 — the Returnable ring with a contact ring

Removal of a driver's pillow of safety

1 — the Steering wheel
2 — the Socket of a spiral spring
3 — the Socket of the module of a pillow of safety
4 — the Multicontact bolt
5 — the Carving plug
6 — the Module of a pillow of safety of the driver

7 — Bolt Torx T30
8 — Bolt Torx T30
9 — the Spiral spring
10 — Key Torx
11 — the Socket of heating of a steering wheel

Arrangement of elements of systems of safety in salon

1 — the Module of management of a safety pillow
2 — the Module of a pillow of safety of the forward passenger
3 — the Gauge of presence of the forward passenger
4 — the Module of a pillow of safety on the right
5 — Management of the right seat

6 — the Module of a pillow of safety of the left seat
7 — the Module of a pillow of safety at the left
8 — the Diagnostic socket
9 — the Spiral spring
10 — the Module of a pillow of safety of the driver

The gauge of failure for safety systems

Fastening of a pillow of safety of the forward passenger

1 — the Pillow of safety of the forward passenger
2 — the Basic arm
3 — Assembly скоба
4 — Angular скоба
5 — Assembly скоба

The block of a head pillow of safety

1 — Rack D
2 — the Fuse
3 — the Bolt
4 — the Keeping loop
5 — the Head lateral pillow of safety
6 — the handle Adapter
7 — the Latch
8 — the Rack And

9 — Samokontrjashchiesja bolts
10 — the Rack In
11 — the Rack With
12 — the Latch
13 — the Bolt
14 — an electroconducting Socket
15 — to Bend back and to fix

Removal of the block of a lateral pillow of safety

Removal of the block of management of systems of safety

Removal

 PERFORMANCE ORDER

    Read and follow instructions on security measures at the reference with a safety pillow. Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

    Isolate plugs of the storage battery. Unblock the mechanism of adjustment of position of a steering column. Will put forward a steering wheel (2) how much it probably and pull it upwards. Establish vertically, address to an illustration the Driver's pillow of safety. Turn away one of two screws Torx T30 (1). Turn a steering wheel on a half-turn back and turn away the second screw Torx (1). Disunite a socket of the block of a pillow of safety (4). Disunite a socket of a sound signal (6). Put the block of a pillow of safety (5) so that the shock party of a pillow showed upwards.

Installation

 PERFORMANCE ORDER

    Join sockets (4) and (6) and fix their lock скобами (distinct click should be heard). Watch that any cable did not adjoin to the gas generator and that the cable has not been pressed. Combine a cable of a pillow of safety at the left in the form of a loop. Combine in a loop a cable of a sound signal. Tighten screws (1) moment 7Нм, address to an illustration the Driver's pillow of safety. Include ignition. Attach a negative cable of the storage battery.

At joining of the storage battery in car salon there should not be people.