Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation ??????????????? a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
    The salon equipment
Onboard electric equipment





Replacement of elastic bands of brushes of a screen wiper

Replacement is necessary for making at deterioration of clearing of glass. Thus it is possible to replace only elastic bands, or complete with щёткодержателями. If elastic bands are replaced only, it is necessary to check up, whether has deformations щёткодержатель.

Removal

 PERFORMANCE ORDER

    Raise the lever and hold a brush perpendicularly to the lever.
    Press a spring clip in a direction of an arrow and put forward a brush downwards from a hook on the lever. Unhook a lever brush.
    Squeeze flat-nose pliers on the closed party of a brush both steel tyres and take out them sideways from top скобы. Further extend rubber together with directing of the rest скобы brushes.

Installation

 PERFORMANCE ORDER

    Insert a new elastic band without tyres in bottom скобы brushes.
    Enter both tyres into the first flute of a brush so that grooves of tyres showed towards an elastic band and fix in flute pads.
    Compress both steel tyres and a brush пассатижами and insert in top скобу so that pads скобы from both parties have entered into grooves (the marksman on an accompanying illustration) brushes.
    Insert a brush (2) into the lever (1). Thus the brush of the left lever should incorporate to a collar, and the directing pad should enter into a brush.
    Press the button of fixing and fix a brush.
    Cast away a brush back. Watch that the brush elastic band on all length adjoined to glass, if necessary, cautiously turn in the holder.