Include ignition and check up working capacity of all external lighting devices.
By means of the assistant or having adjusted the car a backing to any wall, check up working capacity of stoplights. By pressing a brake pedal stoplights should be lighted only. Include all possible lighting devices located in back block headlights (backing signals, dimensional fires, etc.) then again press a brake pedal. If at inclusion of stoplights you find out failure in work any of other included signals, unreliable contact to "weight" or bad contact in a block headlight can be the reason for it.
Now check up working capacity of optics. Include near, then a headlight.
At detection of the fused lamps replace them, following the recommendations resulted in the Head the Onboard electric equipment.
Check up working capacity of all внутрисалонных lighting devices, including illumination of a ware box and a luggage space. Include ignition and be convinced that all control lamps have lighted up. In the Head Controls and receptions of safe operation it is in detail described, what lamps should light up at ignition inclusion. Start the engine. Control lamps should go out. Making a trip to a night-time, check up working capacity of all lamps of illumination (both a control panel, and the instrument panel). At failure detection address to corresponding section of the Head the Onboard electric equipment. Sometimes, lamps can fail because of occurrence on them or on rust cartridges. Having replaced a lamp, you will not get rid of a problem. In this connection, at replacement of any lamp, attentively examine a cartridge from within. At detection of adjournment of green or white colour remove their emery paper.
Include a passing light.
Establish a regulator of range of light in various positions and check up, whether beams of light of both headlights are equally adjusted.
In summary check up working capacity of a horn.
|
|