Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
- Manual box of a gear change
   Specifications
   Removal and check point installation
   Check of level of oil in a manual check point
   Adjustment of a drive of a gear change
   Check of adjustment of the lever of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
Body
Onboard electric equipment




Check of adjustment of the lever of a gear change

 PERFORMANCE ORDER

Check conditions: the switching Lever should be in neutral position in a path of 3/4 transfers.
    Include coupling. Switch all transfers and check up ease of a course.

The lever at switching should not touch a cover of the central console.

    Check up, whether independently from a path of 5th transfer/backing the lever comes back to a path of 3/4 transfers. Check up, whether the backing only joins when the lever preliminary is in neutral position in a path of 3/4 transfers.

From position of 5th transfer of the lever direct switching on a backing should not to be made.

    If such switching appears possible or if 5th transfer and a backing do not join only, check up blocking for 5th transfer and a backing (work HUNDRED).









QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE