Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
- Suspension bracket and steering
   Security measures at work
    Suspension bracket of forward wheels
    Suspension bracket of back wheels
   - Corners of installation of wheels of the car
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
    Steering and safety pillows
Body
Onboard electric equipment




Conditions of check of corners of installation of wheels

Check of corners of installation of the car demands presence of a viewing hole or the special measuring lift. At measurement carrying out it is necessary to satisfy following conditions:

    Pressure of air in tyres corresponds to the set. Forward wheels are put directly. The car is not loaded, the fuel tank is completely filled. Suspension brackets of the car with force have been besieged. The steering is adjusted. Люфты in connections of steering draughts lie within the admissible. Люфты in suspension bracket connections lie within the admissible. Depth of drawing of a protector of tyres of one axis is identical.