Removal and radio receiver installation / the navigating device/CD-changer

Radio receiver

Depending on model in car AUDI A4 various audiosystems can be established. The serial radio receiver is equipped by a radio receiver with the sliding holder, allowing the fast I will eat also radio receiver installation. For this purpose however, the special exhaust tool, sold the complete set with a radio receiver is required.

For removal of a radio receiver, the navigating device or CD-changer established at factory, 2 or 4 keys Т10057 AUDI are required.

The serial radio receiver has the coding for protection against breaking. The coding interferes with unapproved inclusion of the device if its food has been interrupted. A food can be broken at switching-off from the storage battery, at removal of a radio receiver or if has fused a safety lock.

Radio systems AUDI are coded from a control panel. Therefore at a detachment and the subsequent joining of a food or at removal and installation of the same radio receiver code input is not required.

If the radio receiver established later is coded, before a radio receiver detachment it is necessary to find out a code. Otherwise the radio receiver can be included only the manufacturer. Code number is resulted in the radio receiver operation manual. It is not necessary to store it in the car.

Removal

Installation

Specially for CD-changer

Specially for the navigating device with CD-disk drive