The device, service, repair Audi A4, S4 - Removal and control panel installation//Audi А4 hx4.ru

Removal and control panel installation

In a control panel as control lamps light-emitting diodes (LED) are established exclusively. At damage of a light-emitting diode and any other damages to a control panel it is replaced in the complete set.

If instead of the index of day kilometric area the indicator dEF malfunction is available in memory is highlighted. In this case the control panel also is replaced in the complete set.

The reception aerial of the radio hours established in a control panel, is placed on the holder of a back bumper.

Removal

PERFORMANCE ORDER

If the control panel has to be replaced, it is necessary to consider the data from memory of malfunctions. Besides, by means of the diagnostic device it is necessary to consider the data of the indicator of term of service and the indication of the counter of run and to write down them (work HUNDRED). Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

Removal and cover installation on a control panel

Necessarily observe instructions on security measures at the reference with a safety pillow, address to Section the General data and security measures.

Removal and installation of the block of a pillow of safety

Removal and steering wheel installation

Turn out screws (arrows on an accompanying illustration).

Extend a control panel by means of hook AUDI 3370 or HAZET 2520-1 back from a control panel.

Shift the lock lever from an underside and disunite a socket. Take out a control panel.

Installation

PERFORMANCE ORDER

Installation is carried out in sequence, return to removal.

Necessarily observe instructions on security measures at the reference with a safety pillow, address to Section the General data and security measures.

Removal and installation of the block of a pillow of safety

Observe instructions Replacement of the storage battery Has undressed.

Include ignition and check up work of control lamps, and also indicators on a control panel. Consider by means of the diagnostic device the data of the indicator of term of approach THAT and indications of the counter of run (work HUNDRED).