Audi A4, S4
Introduction
Controls and receptions of safe operation
- Current leaving and service
   Specifications
   The indicator of term of approach of maintenance service
   The routine maintenance schedule
   The general information on adjustment
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure in them. A designation of tyres and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and the oil filter
   Checks of brake system. Adjustment of a lay brake
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of a cooling liquid
   Check of a condition of system of release of the fulfilled gases
   Check of level of oil of automatic transmission
   The visual control of a box of a gear change and the main transfer on leaks, check of level and oil addition
   Check of a condition a suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of a liquid of system of hydrostrengthening of a wheel
   Check of a central air of air
   Greasing of terminators of doors, cylinders of locks, cowl hook, сдвижной panels of the hatch of a roof
   The visual control of a seat belt and the block of a pillow of safety
   Check of working capacity of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care it and gymnastics
   Replacement of the battery of emergency supply of system Telematik
   Replacement of an element of the filter of air of salon / the coal filter of clearing of air
   Replacement of a brake liquid
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
   Check of a condition and tension of a gear belt
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
Body
Onboard electric equipment





The indicator of term of approach of maintenance service

Service under schedule Longlife

Service intervals are displayed on the digital display located on a control panel during 5 with ambassador of inclusion of ignition.

Thanks to application of special oil proof to ageing, intervals of service of the engine are increased.

The driver is warned for 2000 km or one month prior to term of service by the indicator message SERVICE IN 2000 km xxx TAGEN (SERVICE THROUGH 2000 km ххх DAYS) after each inclusion of ignition. The rest of run before service, can be at any moment caused on the indicator after pressing of a key (1).

At approach of term of service there is a message SERVICE!. After that it is necessary to spend service.

After carrying out of service the indicator should be dumped for new readout. It is carried out by means of device V.A.G-1551 or VAS-5051.

If within the limits of service or repair in the engine oil not corresponding to norms Longlife VW/AUDI is filled in, it is necessary to switch system from "flexible" service to "the rigid" schedule. Under the rigid schedule service is made each 15000 km or 12 months. Switching of the indicator of service is made by control panel keys.

For preservation of flexible hours of service the indicator should be nulled by means of diagnostic device VW/AUDI (work HUNDRED).

HUNDRED AUDI in addition, at each inspection, poll memory of malfunctions of electronic blocks of management of the engine, ABS, pillows of safety and blocking from stealing by means of device V.A.G-1551. Therefore it is expedient to visit HUNDRED even if maintenance service is made by own forces through regular time intervals. Interrogation of memory of malfunctions is carried out by connection to a diagnostic socket. Thus it is possible to null the indicator of term of service if necessary also.

Zeroing of the indicator of intervals THAT after maintenance service carrying out

Probably by means of a key located in a control panel. Thus switching of the indicator of intervals THAT from "the flexible" schedule on "rigid" is made.

Switching on the rigid schedule of intervals of service:

 PERFORMANCE ORDER

    Be convinced that ignition is switched off, if necessary, switch off ignition. Press and keep a key (1). At the pressed key include ignition, without starting the engine. After отпускания keys on the display there is a message SERVICE IN???? km (SERVICE THROUGH???? Km) or SERVICE!. Key of dump (2) keep pressed until the message SERVICE IN----Tagen (SERVICE THROUGH — days) or SERVICE! Will not disappear.

If the key is not pressed during 5 with the dump mode is automatically switched off.

    Switch off ignition.

Make dump of the indicator of intervals of service only at once after its carrying out, otherwise it will lead to erroneous messages.