Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
    The external equipment
   - The salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of a lay brake
      Removal and installation of a cover of the lever of switching of transfers/selectors
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from outside the driver
      Removal and installation of a ware box
      Removal and installation противосолнечного a peak
      Removal and installation of facing of a rack And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
Onboard electric equipment




Removal and installation of a forward seat

Removal

 PERFORMANCE ORDER

For removal of a forward seat from a lateral pillow of safety adapter AUDI VAS 6036 is required.

    Seat with height adjustment: Lift a seat.
    Pull upward a cover (2) over a tip (1) belts at a seat and remove.
    Press a tip of a belt (1) downwards (arrows) and disconnect from a seat. Extend a seat belt from directing a belt at a seat.
    Shift a forward seat (4) forward.
    Extend 4 clips (2) and remove back safety covers (1). Shift a forward seat back, extend 2 clips and remove forward covers of the directing. Turn out on 2 screws (3) behind and in front. To exclude operation a pillow of safety of a head, switch off ignition and disconnect at first negative (-), and then positive cables of the storage battery. Instructions are resulted in Section Replacement of the storage battery.
    Cast away back a forward seat (4) and remove upward a cover (5) boxes for tips.

Before undocking of a socket of a lateral pillow of safety remove an electrostatic charge for what quickly concern the door or body lock. The adapter of a pillow of safety should remain attached until the seat will not be again established. Necessarily observe security measures at the reference with a safety pillow, address to Section the General data and security measures.

    Press a pad at the tip and disunite a socket of a lateral pillow of safety (orange colour) (6). Disunite a socket of giving of a food (red colour) (7), heating of a seat (8) (green colour) and a seat belt (black colour) (9) if they are available. Attach the tip lateral a safety pillow (orange colour) (6) to the adapter of a pillow of safety VAS 6036.

The adapter provides additional protection against an electrostatic charge.

    If it is possible, other end of the adapter of a pillow of safety attach to the tip of giving of a food (red colour) (7). Take out a forward seat.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus a forward seat fix the moment 50Нм.

During joining of the storage battery in salon there should not be people.

    Remove isolating tape from a negative pole of the storage battery, attach at first positive (), and then a negative cable (-) to a battery accumulator room.

Observe instructions Replacement of the storage battery Has undressed.

    If after inclusion of ignition the signalling device of a pillow of safety on a control panel does not die away, it is necessary to consider the information from memory of malfunctions on HUNDRED.