|
Audi A4, S4 Introduction - Controls and receptions of safe operation Controls and devices Information system of the driver (FIS) Unlocking and car lock-out Illumination and review maintenance Seats and niches Heater, ventilation and air conditioner Automatic transmission (АТ) Communication and navigation Universal remote radio management HOME LINK Safety systems Features of operation and auxiliary systems Обкатка Trailer towage In case of emergency Car refuelling Current leaving and service The engine Systems of cooling, heating and the air conditioner Power supply systems, release and decrease in toxicity of the fulfilled gases Systems of an electric equipment of the engine Manual box of a gear change Automatic transmission Coupling, power shafts and differential Brake system Suspension bracket and steering Body Onboard electric equipment |
Seats and niches Manual adjustment of forward seats Regulators of position of a seat The seat can be regulated on many parametres.
Some of the shown controls enter into a complete set only certain updatings or are established to order. Longitudinal adjustment of a seat
Regulation of height of a seat
Regulation of an inclination of a back
Regulators of position of a seat (sports seat) The seat can be regulated on many parametres.
Some of the shown controls enter into a complete set only certain updatings or are established to order. Longitudinal adjustment of a seat
Seat pillow
Adjustment of an inclination of a seat
Regulation of height of a seat
Regulation of an inclination of a back
Electric adjustment of forward seats Regulation of position of a seat The principle of management of regulators corresponds to a design and seat function.
Controls of regulation of position of seats on the arrangement, design and a functional purpose correspond to a seat design. Regulation of position of a seat is carried out according to the given logic by pressing of switches. Seat giving forward/back
Seat lifting/lowering
Lifting/lowering of a forward part of a pillow
Lifting/lowering of a back part of a pillow
Regulation of an inclination of a back
Exit of a lumbar support
The lumbar support provides прилегание lumbar department of a backbone on all its natural contour, with the landing which is not tiring even at long trips. Memory of position of a seat of the driver The description Located at doors of the driver memory keys it is possible to program and reproduce four various variants of position of a seat and external зеркал*.
Memory keys Keys of a memory 1, 2, 3 and 4 it is possible to program and reproduce a maximum four various variants of position of a seat and external зеркал*. Key STOP The memory of position of a seat is disconnected by pressing of key STOP. Inscription OFF being near to key STOP (it is visible only at included light) Thus burns. All entered positions remain in memory. Position of a seat and external зеркал* thus can be regulated only in the usual way - by means of the electric drive. The memory is recommended to be disconnected pressing of key STOP at incidental using the car the driver and consequently absence of need of programming of position of a seat for it.
Programming of positions At programming and reproduction of all functions should be pressed key STOP (is drowned).
At each new programming on the same key there is a dump of the previous data. At programming it is recommended to begin with a key 1, leaving for other drivers on one of other keys. At lock-out of the car by a radio key (remote radio management) last position of a seat and mirrors is entered into memory. The given position of a seat and mirrors automatically is reproduced remote radio management at the subsequent unlocking of the car. Position of external mirrors is reproduced right after unlockings, and position of a seat of the driver after opening of a door of the driver. Thus however there is no dump of the data of a memory undertaken before distribution on keys 1-4. At any moment reproduction of the entered positions by corresponding keys is possible. Reproduction of positions The programmed positions can be reproduced both memory keys, and remote radio management (radio key). Reproduction by memory keys
Reproduction by remote radio management
If after car unlocking by remote radio management the door of the driver remains closed during 10 minutes seat position reproduce memory keys. Radio key programming For reproduction of the entered positions by remote radio management it is necessary to program a radio key on a memory key. Radio key programming on a memory key
Cancellation of programming of a radio key on a memory key
At reprogramming there is an automatic dump of the previous data. It is recommended to program, that the key 1 corresponded to one, and a key 2 - to other factory radio key. Through contractual partner Audi if necessary it is possible to get two more others of a radio key and to program on keys 3 and 4. Headrests Headrests of forward seats Correctly established headrests in a combination to the fastened seat belt provide effective protection.
Headrest lifting
Headrest lowering
Inclination regulation
Removal of headrests
Installation of headrests
Headrests are regulated on height and an inclination. They should be established on growth. Correctly established headrests in a combination to seat belts provide effective protection. The optimum protective effect is provided at a finding of an upper edge of a headrest a minimum at level or above level of eyes. Headrests of back lateral seats
Headrest lifting
Headrest lowering
Removal of headrests
Installation of headrests
Average headrest of a back seat Headrest lifting
|