Removal and installation of facing of a back door Door facing
Removal
|
|
Disconnect a negative cable (-) the storage battery.
Disconnect from facing a decorative lath (2) and remove it forward.
Turn out 4 screws (3).
Manual стеклоподъёмник: Remove the handle стеклоподъёмника (5).
Enter a plastic wedge around clips between the panel of a door and facing and remove facing from a door.
A little take away facing from a frame of a door and disconnect a cable of a drive of a door, address to Section Removal and installation of facing of a forward door.
Disunite a switch socket стеклоподъёмника (9).
Remove facing from a door frame.
|
|
Installation
|
|
Before installation check up correctness of position of tightening nuts (8) and разжимных nuts (7) on a door frame.
Installation is carried out in sequence, return to removal. Thus pay attention that the hook (3) draughts shows upward.
Manual стеклоподъёмник: Establish into place the handle стеклоподъёмника.
Attach a negative cable (-) the storage battery.
|
|
The handle стеклоподъемника
Removal
|
|
Enter a screw-driver between a cover (4) and the handle стеклоподъёмника.
Uncover the handle стеклоподъёмника.
Turn out the screw (6) and remove the handle.
|
|
Installation
|
|
Establish the handle стеклоподъёмника in position at 6 o'clock ( 15 ) at the closed window on a handle axis.
|
|
|