Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation ??????????????? a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
    The salon equipment
Onboard electric equipment




Removal and installation of the electric motor of a drive стеклоподъёмника

The drive electric motor стеклоподъёмника can be removed and established in any position of the electric motor or glass.

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

    Remove a door upholstery, address to corresponding Section.
    Disunite a socket of the block of management стеклоподъёмника.
    Turn out 3 bolts (2) and remove from a door the drive electric motor стеклоподъёмника (1).

Installation

 PERFORMANCE ORDER

    Establish the electric motor on carving pins (3), screw bolts and tighten their moment 3.5Нм. Thus watch that have entered into the panel of a door (arrow). Join a socket стеклоподъёмника and establish into place a door upholstery, address to corresponding Section. Attach a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

    Establish the electric motor in a substantive provision: Include and again switch off ignition. Again include and lift glass against the stop upwards. Thus keep the switch стеклоподъёмника pressed 2 with. Now the electric motor is correctly adjusted.