Audi A4, S4
Introduction
Controls and receptions of safe operation
Current leaving and service
The engine
Systems of cooling, heating and the air conditioner
Power supply systems, release and decrease in toxicity of the fulfilled gases
Systems of an electric equipment of the engine
Manual box of a gear change
Automatic transmission
Coupling, power shafts and differential
Brake system
Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation ??????????????? a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
    The salon equipment
Onboard electric equipment





Removal and installation of a frame of a window of a forward door

Frame of a window of a forward door

Instructions: Removal and installation of a frame of a back door essentially does not differ.
1 — a window Frame
2 — Steklopodyomnik
3 — the Forward door
4 — the Bolt, 32Нм
5 — the Cover

6 — the Bolt, 32Нм
7 — the Bolt, 6Нм
8 — the Bolt, 32Нм
9 — the Bolt, 32Нм
10 — the Bolt, 10Нм

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

    Remove a door upholstery, address to corresponding Section. Disunite all sockets. Remove the electric motor стеклоподъёмника, address to Section Removal and installation of the electric motor of a drive стеклоподъёмника. Turn out consistently bolts (7), (4), (8), (10), (6) and (9), preliminary having uncovered (5). Take out upwards a frame of a window (1) with стеклоподъёмником (2) of a door (3). An arrow – the fixing screw.

Installation

 PERFORMANCE ORDER

    Enter glass on half into a window frame. Insert a frame of a window with стеклоподъёмником from above into a door. Press carving fingers of the electric motor стеклоподъёмника through the internal panel of a door so that they were fixed. Lay above a sealant of a door at a window frame. Screw consistently bolts (6), (9), (4), (8), (10) and (7). Tighten by hand bolts (6) and (9). Press from above a window frame inside and tighten bolts (4) and (8) moment 32Нм. Press on a cover (5). Tighten bolts (6) and (9) moment 32Нм. Tighten a bolt (10) moment 10Нм. Tighten bolts (7) moment 6Нм. Tighten fixing screw (arrow) the moment 32Нм. Establish into place the drive electric motor стеклоподъёмника, address to Section Removal and installation of the electric motor of a drive стеклоподъёмника. Join a socket. Establish a door upholstery, address to Section Removal and installation of facing of a forward door. Attach a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.